View Larger Image |
MiniMax 75 and 100 Heaters Replacement Parts
Replacement Parts
| MINIMAX 75 AND 100 HEATERS | ||
| Item No. | Part No. | Description |
| 1 | Indoor draft hood kit 1 |
|
| 1A | Outdoor top |
|
| 2 | Indoor top, cover 1 |
|
| 3 | Outdoor top 1 |
|
| 4 | Middle top |
|
| 5 | Flue collector |
|
| 6 | Return header |
|
| 7 | Bolt, 3/8 x 16 UNC x 3/4 |
|
| 8 | Gasket, fin tube, seal |
|
| 9 | Heat exchanger less heads |
|
| 10 | Main header, inlet/outlet |
|
| 11 | Insulation, front |
|
| 11 | Insulation, back |
|
| 11 | Insulation, sides |
|
| 12 | Ignitor electrode bracket |
|
| 13 | Burner, natural gas |
|
| 13 | Burner, propane gas |
|
| 13 | Burner, 75, natural gas |
|
| 13a | Burner tray assembly, complete, natural gas, millivolt |
|
| 13a | Burner tray assembly, complete, propane, millivolt |
|
| 13a | Burner tray assembly, complete, natural gas, DSI |
|
| 13a | Burner tray assembly, complete, propane, DSI |
|
| 14 | Ignitor electrode |
|
| 15 | Gas valve, natural, DSI, w/bracket |
|
| 15 | Gas valve, propane, DSI, w/bracket |
|
| 15 | Gas valve-natural, millivolt, |
|
| 15 | Gas valve, propane, millivolt, |
|
| 16 | Electronic thermostat, direct spark models |
|
| 16 | Thermostat, millivolt models |
|
| 17 | On/off switch S.P.S.T. |
|
| 18 | Heat shield burner tray |
|
| 19 | Control panel assembly |
|
| 20 | Door assembly |
|
| 21 | Control bracket |
|
| 22 | Ignition control DSI |
|
| 23 | Transformer 24 Vac CH w/circuit breaker |
|
| 25 | Inspection panel |
|
| 26 | Burner tray back support |
|
| 27 | Burner tray side support |
|
| 28 | Heat exchanger support brackets |
|
| 29 | Hi-limit safety switch |
|
| 30 | Flow valve, assembly |
|
| 31 | Pressure switch |
|
| 32 | Baffle hold down bracket |
|
| 33 | Flue baffle |
|
| NOT SHOWN | ||
| Item No. | Part No. | Description |
Thermal cutoff |
||
Pilot natural gas, millivolt |
||
Pilot propane, millivolt |
||
Thermopile generator |
||
Quick-flange kit for 2 in. slip connection |
||
Kit wiring, MMX 100 millivolt |
||
Quick-flange II kit for 1-1/2 in. thd. Connection |
||
Kit wiring, MMX 100 DSI |
||
Knob, T-Stat board |
||
Therm. knob stopper |
||
Presslite Piezo ignitor assembly millivolt |
||
Valve drain, 1/4 NPT |
||
Hi-tension ignition cable |
||
Rubber bushing, 2 in. i.d. |
||
Pilot bracket/shield, millivolt |
||
Manifold |
||
Rod flow valve |
||
Spring flow valve |
||
Plug flow valve |
||
Plunger flow valve |
||
Pilot Tube |
||
Break Away Fitting |
||
1: Indoor draft hood kit consisting of indoor draft hood (471198) and items 2 & 3